Peumatic Grouting pump is designed for strain and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes so as to reinforce the loose rock mass. The maximum grain size can’t exceed 0.2 mm.
Grouting pump operation and maintenance is easy, protected and dependable. This pump is used in mines operating beneath tough circumstances as a result of it is reliable and explosion-proof.
Basic Pneumatic Grouting pump embody: An air inlet, the pneumatic cylinder, mounting base frame and stand, pressure gauge , pumping cylinder, outlet with quick launch coupling and wheels.
How it actually works

Pneumatic strain in the air cylinder exerts a high pressure on the grout mixture which outcomes in ejection of grout with a excessive stress and velocity. The valves of the air cylinder within the pump perform mechanically to actuate the cylinder. The pneumatic cylinder then moves the plunger up and down to complete the pumping cycle.
Pneumatic grout pump could be pushed even with out Electrical power provide in remote areas by utilizing engine driven compressor.

The pump is majorly utilized in building and mining industry for injecting material into wide and medium measurement hole in beams, columns ,basement walls and flooring, carry shaft concrete wall fill-up and so on. In mining business it is used to replenish cement answer the place there is a hole exists between structure and rock and for soil stabilization.
Detachable design tends to easy maintenance and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work

This pump is broadly utilized in tunnels, coal mine, bridges and dams, constructing foundation, and other underground initiatives, and inflammable, explosive sites and other unhealthy environment.
It has software in chemical business also to pump out chemical slurries.
The pump is electrical energy free so, can be utilized at any web site condition whether it’s rural or city.
Mining Pneumatic Grouting pump has a larger discharge slurry adjustment range. Generally the final amount of the grouting volume is 8 or10 occasions of the quantity at first. And the final grouting quantity proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specially designed for high-pressure grouting. And it adopts full hydraulic drive, it’s strain and move can be adjusted according to the necessities of grouting,(The circulate of grouting pump is 0-100L/min, strain of discharge is 0-10MPa).besides, This Pneumatic high-pressure grouting pump can be used for grouting single or double fluid.
High-pressure grouting pump is mainly used for highways, railways, water and electrical energy, development, mining and so on. ground/underground development.

Mining Pneumatic Grouting pump has the benefits of low vitality consumption, small vibration, low noise, small dimension, excessive efficiency, dependable performance, pressure and circulate management, lengthy life and so forth. Common mine grouting pump has pneumatic injection pump, twin fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump is also Light weight and with a wheelie design it can be carried easily. It is designed for simple operation and low maintenance. Last but not least its spare components are easily available.