Peumatic Grouting pump is designed for stress and filling grouting of cement and bentonite slurries. It is primarily used for injecting (grouting) bar anchors and the drill holes in order to reinforce the unfastened rock mass. The most grain dimension can not exceed zero.2 mm.
Grouting pump operation and upkeep is simple, safe and dependable. This pump is used in mines working underneath troublesome situations because it is reliable and explosion-proof.
Basic Pneumatic Grouting pump include: An air inlet, the pneumatic cylinder, mounting base frame and stand, stress gauge, pumping cylinder, outlet with quick launch coupling and wheels.
How it works
Pneumatic strain in the air cylinder exerts a excessive pressure on the grout mixture which results in ejection of grout with a high pressure and velocity. The valves of the air cylinder within the pump function mechanically to actuate the cylinder. The pneumatic cylinder then moves the plunger up and down to complete the pumping cycle.
Pneumatic grout pump could be driven even without Electrical power provide in distant areas through the use of engine pushed compressor.
The pump is majorly utilized in development and mining industry for injecting materials into wide and medium dimension hole in beams, columns ,basement partitions and flooring, carry shaft concrete wall fill-up and so on. In mining เกจวัดไนโตรเจนราคา is used to fill up cement resolution the place there is a hole exists between construction and rock and for soil stabilization.
Detachable design tends to simple upkeep and transportation. Challenging works like Grouting in Bridges.
READ: How hydraulic submersible pumps work
This pump is extensively utilized in tunnels, coal mine, bridges and dams, building foundation, and other underground projects, and inflammable, explosive sites and different dangerous setting.
It has software in chemical business also to pump out chemical slurries.
The pump is electrical energy free so, can be used at any site situation whether it is rural or city.
Mining Pneumatic Grouting pump has a bigger discharge slurry adjustment vary. Generally the ultimate amount of the grouting volume is eight or10 occasions of the quantity at first. And the final grouting quantity proves that filling is compacted.
Simply put; Pneumatic high-pressure grouting pump is specially designed for high-pressure grouting. And it adopts full hydraulic drive, it’s strain and move may be adjusted according to the requirements of grouting,(The flow of grouting pump is 0-100L/min, pressure of discharge is 0-10MPa).besides, This Pneumatic high-pressure grouting pump can be used for grouting single or double fluid.
High-pressure grouting pump is principally used for highways, railways, water and electricity, construction, mining and so on. ground/underground construction.
Mining Pneumatic Grouting pump has the advantages of low power consumption, small vibration, low noise, small size, high efficiency, dependable efficiency, pressure and flow control, long life and so forth. Common mine grouting pump has pneumatic injection pump, twin fluid injection pump, extrusion injection pump and piston injection pump.
Pneumatic grout pump can additionally be Light weight and with a wheelie design it may be carried simply. It is designed for easy operation and low maintenance. Last however not least its spare parts are simply obtainable.